F 550 2WD Super Duty V8-7.3L DSL Turbo VIN F (2002)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal
Special Tool(s)
Removal
1. Remove the transmission.
2. Remove the bolts, spacers and flexplate (for automatic transmission) or flywheel (for manual transmission).
3. NOTE: Use extreme care when removing the flywheel front adapter to prevent damage to the alignment dowel pins.
Remove the flywheel front adapter.
4. Remove the crankshaft rear oil seal retaining bolts and the crankshaft rear oil seal.
5. Inspect the crankshaft rear oil seal, wear sleeve and alignment dowel pins for damage. Install new components as necessary.
