F 550 2WD Super Duty V8-7.3L DSL Turbo VIN F (2002)
EGR Control Solenoid: Service and Repair
REMOVAL
1. Remove the turbocharger compressor manifold.
2. Remove the exhaust back pressure solenoid.
1
Disconnect the electrical connector.
2
Remove the bolt and the retaining bracket.
3
Remove the exhaust back pressure solenoid.
NOTE: The turbocharger is removed for clarity only.
INSTALLATION
1. Follow the removal procedure in reverse order.
^
Lubricate the O-ring seals with clean engine oil prior to installing the exhaust back pressure solenoid.