F 550 2WD Super Duty V8-7.3L DSL Turbo VIN F (2002)
6. Remove the safety belt retractor.
1
Use the Seat Belt Bolt Bit to remove the bolt.
2
Remove the safety belt retractor.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten bolts to specification.
^
Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not remain
closed, install a new shoulder safety belt guide.
2. Check the restraint system for correct operation.