ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Band Apply Servo, A/T|Service and Repair|Page 4333 > < Output Shaft Speed (OSS) Sensor|Page 4327
Page 1
background image

Band Apply Servo: Service and Repair

Intermediate Servo 

Removal 

1. Remove the main control valve body. 

2. WARNING:  The intermediate servo is under spring pressure, care should be taken when removing it. It could cause bodily harm. 

NOTE:  Gently tap on the servo cover with a rubber mallet to compress and allow servo assembly to pop up.

Remove the intermediate servo.

Installation 

Band Apply Servo, A/T|Service and Repair|Page 4333 > < Output Shaft Speed (OSS) Sensor|Page 4327