F 550 4WD Super Duty V10-6.8L VIN D (2004)
2. NOTE: Tighten the bolts in two stages.
Tighten the bolts in the sequence shown.
^
Stage 1: Tighten to 2 Nm (18 inch lbs.).
^
Stage 2: Tighten to 10 Nm (89 inch lbs.).
3. Position the water thermostat and housing.
4. Install the upper intake manifold.
^
Position the upper intake manifold gaskets and the intake manifold, and loosely install the bolts.
