F 550 4WD Super Duty V10-6.8L VIN S (2000)
5. Disconnect the condenser-to-evaporator line from the A/C condenser core and remove the line.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
Auxiliary Climate Control
REMOVAL
1. Perform the Refrigerant Discharging and Recovery Procedure. Refer to: Heating and Air Conditioning, Service and Repair, Refrigerant
Discharging and Recovery Procedure, See: Service and Repair/Refrigerant Discharging and Recovery procedure
2. Remove the tube clamp.
3. Disconnect the auxiliary line fitting.