F 550 4WD Super Duty V10-6.8L VIN S (2000)
9. Install the vacuum reservoir retaining nuts.
10. Install the fender splash shield fasteners, four screws, three bolts, and three pin-type retainers.
11. Install both RH wheels.
12. Lower the vehicle.
13. Evacuate, leak test and charge the A/C system. Refer to: Heating and Air Conditioning, Service and Repair, Evacuation and Charging
Procedure, See: Heating and Air Conditioning/Service and Repair/Evacuation and Charging Procedure
Compressor to Condenser Discharge Line
REMOVAL
1. Perform the Refrigerant Discharging and Recovery Procedure. Refer to: Heating and Air Conditioning, Service and Repair, Refrigerant
Discharging and Recovery Procedure, See: Heating and Air Conditioning/Service and Repair/Refrigerant Discharging and Recovery procedure
2. Remove the three screws and reposition the degas bottle.