F 550 4WD Super Duty V10-6.8L VIN S (2000)
Axle Nut: Specifications
Rear Full Floating Axle - Ford
Rear Hub Nut ............................................................................................................................................................................................ 81 Nm (60 Lb-Ft)
Note: Adjust hub nut as follows:
For new bearings, ratchet back 5 teeth or notches (1/8 turn) on the hub nut. 5 notches must be felt during this operation in order to have performed it
correctly.
For used bearings, ratchet back 7 teeth or notches (1/6 turn) on the hub nut. 7 notches must be felt during this operation in order to have performed it
correctly.
Axle Shaft Bolts ..................................................................................................................................................................................... 109 Nm (80 Lb-Ft)