F 550 4WD Super Duty V10-6.8L VIN S (2000)
to be flashed. For more information, refer to Powertrain Management for flash programming information.
As-Built Data Center
The As-Built Data Center keeps a record of the vehicle configuration in a database retrievable using the VIN. The As-Built Data Center records the
applicable module configurations stored in each module before the vehicle leaves the factory. The As-Built Data Center will always reflect the original
build of the vehicle as it left the factory. Only contact the As-Built Data Center when directed to do so by the scan tool.
Customer Preference Items
This method is used to enable or disable module-controlled items or systems to suit the preference of the customer. Not all features controlled by the
module are listed in this configuration method. Refer to the Module Configuration Index for a list of features per module. See: Testing and
Inspection/Module Configuration/Scan Tool Testing/Module Configuration Index
If an item is changed using the customer preference items configuration method, the changed information will not be stored in the PCM VID block.
The VID block will retain the original settings as they were recorded when the vehicle left the factory.
Manufacturer Options
This method of configuration is used on modules that do not support PMI. This method is used to enable or disable module-configurable features to
set module option content of the vehicle and the preference of the customer. Refer to the Module Configuration Index for a list of features per module.
See: Testing and Inspection/Module Configuration/Scan Tool Testing/Module Configuration Index
If an item is changed using the manufacturer opt ions configuration method, the changed information will not be stored in the PCM VID block. The
VID block will retain the original settings as they were recorded when the vehicle left the factory.