F 550 4WD Super Duty V10-6.8L VIN S (2000)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
Removal
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
Using a 1/8-inch drift, press the ignition switch lock cylinder release pin through the access hole while pulling out the ignition switch lock
cylinder.
Installation
1. Follow the removal procedure in reverse order.
^
Verify ignition switch lock cylinder operation.
