F 550 4WD Super Duty V10-6.8L VIN S (2000)
Suspension Strut / Shock Absorber: Service and Repair
Rear
Shock Absorber - Super Duty F-450, F-550, Dana Axle
Shock Absorber - Super Duty F-450, F-550, Dana Axle
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a replacement
part of lesser quality or substitute design. Torque values must be used as specified during re-assembly to ensure proper retention of these parts.
CAUTION: The low pressure gas shock absorbers are charged with nitrogen gas. Do not attempt to open, puncture or apply heat to shock absorbers.
1. Raise and support the vehicle.
2. Using a suitable jack, support the rear axle.
3. Remove the shock absorber lower retaining nut and bolt.
4. Remove the nut from the upper shock absorber mounting bracket and remove the shock.
Installation
