F 550 4WD Super Duty V10-6.8L VIN S (2000)
4. Remove the differential case with the special tool from the differential housing.
^
Do not remove the special tool from the differential case hubs.
5. Install the inner oil baffle and the inner and outer pinion bearing cups.
1
Position the oil baffle and the bearing cups in the differential housing.
2
Place the special tools on the inner and outer bearing cups.
^
For model 50 axles, place special tool 205-139 on the outer pinion bearing cup.
^
For model 50 axles, place special tool 205-140 on the inner pinion bearing cup.
^
For model 60 axles, place special tool 205-006 131 on the outer pinion bearing cup.
^
For model 60 axles, place special tool 205-006 B2 on the inner pinion bearing cup.
3
Install and tighten special tool 205-098 to seat the cups.
^
Remove the special tools after seating the cups.
6. NOTE: If the feeler gauge can fit between a cup and the bottom of its bore at any point around the cup, remove and reseat the cup.
Check that the cups have seated correctly in their bores.