ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Starting System- No Crank Condition|Page 8658 > < Starting System- No Crank Condition|Page 8656
Page 7
background image

11. Install the A/C clutch disc and hub.

12. Install the A/C clutch disc and hub retaining bolt.

1

Using the special tool, hold the A/C clutch disc and hub.

2

Tighten the bolt.

All vehicles

13. Measure and adjust the clutch air gap by removing or adding A/C clutch disc and hub spacers.
14. Install the A/C compressor.

Starting System- No Crank Condition|Page 8658 > < Starting System- No Crank Condition|Page 8656