F 550 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
IGNITION LOCK CYLINDER - FUNCTIONAL
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
Using a 1/8-inch drift, press the ignition switch lock cylinder release pin through the access hole while pulling out the ignition switch lock
cylinder.
INSTALLATION
To install, reverse the removal procedure.
Verify ignition switch lock cylinder operation.