F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
Sunroof / Moonroof Track: Service and Repair
ROOF OPENING PANEL REAR TROUGH GUIDE
Exploded View
Removal and Installation
NOTE: The roof opening panel must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the roof
opening panel has been removed from the roof opening panel assembly, a new roof opening panel motor/module has been installed or when a new roof
opening panel assembly has been installed. For additional information, refer to Roof Opening Panel Motor Initialization. See: Testing and
Inspection/Programming and Relearning
1. Remove the roof opening panel.
2. Remove the 2 plastic trough guide retaining screws and the trough from the trough guide assembly.
-
To install, tighten to 1 Nm (9 lb-in).