F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
Radiator: Service and Repair
Cooling System Radiator
RADIATOR
Removal
1. Drain the fuel and turbocharger cooling system.
2. NOTE: The side bolt does not have to be removed to remove the fuel cooling system radiator.
Remove the cooling system radiator bolt. Remove the fuel cooling system radiator by sliding it up off the retainers.
Installation
1. NOTE: Do not tighten the fuel cooling system radiator bolt at this time. The fuel cooling system radiator must be removed and positioned
horizontally to bleed the fuel cooling system. Only install the bolt tight enough to ease connection of the coolant hoses to the fuel cooling system
radiator.
Position the fuel cooling system radiator and install the bolt finger tight.
2. Fill and bleed the fuel and turbocharger cooling system.
