F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
Engine Mount: Service and Repair
Powertrain/Drivetrain Mount Neutralizing
Powertrain/Drivetrain Mount Neutralizing
NOTE: Refer to the appropriate procedure for special instructions on loosening and tightening mount fasteners.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
3. Lower the vehicle.
4. CAUTION: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.
Move the vehicle in forward and reverse 0.6-1.2 m (2-4 ft).
5. Raise and support the vehicle.
6. Tighten the powertrain/drivetrain mount fasteners.
7. Lower the vehicle.
8. Test the system for normal operation.
