F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
-
Tighten to 31 Nm (23 lb-ft).
14. Tighten the 2 EGR cooler lower nuts.
-
Tighten to 31 Nm (23 lb-ft).
15. Install the EGR valve coolant supply hose position retainer and the nut.
-
Tighten to 12 Nm (9 lb-ft).
16. Using a new clamp, connect the EGR valve coolant supply hose.
-
Tighten to 4 Nm (35 lb-in).
17. Connect the EGRT sensor electrical connector.
18. Install the cooling fan stator.
19. Position back the CAC tube and tighten the clamp.
-
Tighten to 8 Nm (71 lb-in).
20. Position back the power steering reservoir and install the 2 bolts.
-
Tighten to 8 Nm (71 lb-in).
21. Connect the fuel cooler tube to the retainer on the power steering reservoir.
22. Install the spring clip and connect the upper radiator hose quick connect coupling.
23. Install the degas bottle assembly.