F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
-
To install, tighten to 30 Nm (22 lb-ft).
3. WARNING: Always tighten the child safety seat tether anchor/bolt to specification. Failure to follow this instruction may result in the
child's safety seat being incorrectly secured, which increases the risk of serious personal injury or death to the child in a sudden stop or
crash.
To install, reverse the removal procedure.
-
After seat backrest installation, make sure the child safety seat tether anchor strap is accessible and not trapped between the seat backrest and
cab back panel.
4. Check the active restraint system for correct operation.