F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
5. Install the transfer case control bracket bolt.
^
Tighten to 40 Nm (30 ft. lbs.).
6. Position the shift lever with the bezel and boot assemblies. Install the shift lever bolt.
^
Tighten to 27 Nm (20 ft. lbs.).
7. Slide the inner shift lever boot and bracket into position and install the 2 screws.
8. Install the shift lever boot and bezel.
9. Verify the shift sequence from 2H to 4L to 2H.