ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sensors and Switches - Body and Frame > < Parking Assist Switch|Diagrams
Page 1
background image

Parking Assist Switch: Service and Repair

REMOVAL

1. Remove the parking aid switch trim plate by gently prying the plate out of the instrument panel.

2. Remove the parking aid switch.

1

Disconnect the electrical connectors from the parking aid switch, rear defrost switch (if equipped) and transfer case control switch (if
equipped).

2

Release the locking tabs that retain the parking aid switch to the switch plate.

3

Remove the parking aid switch from the switch plate.

INSTALLATION

1. To install, reverse the removal procedure.

Sensors and Switches - Body and Frame > < Parking Assist Switch|Diagrams