F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Wheel Fastener: Service and Repair
Rear
Wheel Studs
Special Tool(s)
Special Tool(s)
Removal
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. On vehicles equipped with dual rear wheels, go to Step 7.
4. Remove the disc brake caliper and rotor.
5. Remove the rear wheel hub assembly.
6. Using a suitable press, remove the wheel bolt from the wheel hub and discard.
7. NOTE: For vehicles equipped with dual rear wheels, use the C-Frame and Clamp Assembly Tool to remove the wheel bolt on the vehicle.
Remove the wheel bolt from the wheel hub and discard.
Installation
