Festiva L4-81 1.3L SOHC EFI (1989)
5.
Peel back wire harness electrical tape, then disconnect wiper motor electrical connector.
6.
Remove wiper motor to liftgate attaching bolts, then the wiper motor.
7.
Check inner and outer bushings and shaft O-ring for damage, and replace parts as necessary.
8.
Reverse procedure to install. Cycle wiper motor several times to ensure motor is in Park position before installing wiper arm. When properly
installed, tip of wiper blade should be approximately 3 inches from edge of liftgate window seal.
