Removal and Installation Special Tool(s) | Retractor, Rear Brake Caliper Piston 206-012 | Materials Name Specification Brake Fluid - Super DOT4 ESD-M6C57-A Removal CAUTION:If brake fluid is spilt on the paintwork, the affected area must be immediately washed down with cold water. | -
Release the parking brake. | | -
Remove the wheel and tire. For additional information, refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). | | -
Detach the brake hose from the brake hose support bracket. | | -
CAUTION:Suspend the brake caliper to prevent load being placed on the brake hose. Detach the brake caliper from the brake caliper anchor plate. | Installation | -
CAUTION:When the brake caliper piston is retracted into the brake caliper piston housing, brake fluid will be displaced into the brake fluid reservoir. CAUTION:Support the brake caliper during brake caliper piston retraction. Using the special tool, retract the brake caliper piston. | | -
NOTE:Make sure that the brake pad contact points are clean and free from contamination. To install, reverse the removal procedure. | | -
Fully depress and release the brake pedal. | | -
Check the fluid level in the brake fluid reservoir and top up if necessary with brake fluid. | | |