In-vehicle Repair Special Tool(s) | Remover, Crankshaft Seal 303-293 | | Installer, Crankshaft Front Seal 303-684 | | -
Remove the timing belt. For additional information, refer to Timing Belt in this section. | 2. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Timing belt rear cover retaining bolts 3. To install, reverse the removal procedure. Removal Details Item 3 : Camshaft seal | -
Using the special tool, remove the camshaft seal. | Installation Details Item 3 : Camshaft seal | -
NOTE:A new camshaft seal is supplied with an alignment and protection sleeve that must be removed following installation. Using the special tool, install the camshaft seal. - Remove and discard the alignment sleeve.
| |