In-vehicle Repair Special Tool(s) | Remover, Crankshaft Seal 303-293 | | Installer, Crankshaft Front Seal 303-733 | | -
Remove the timing belt. For additional information, refer to Timing Belt - in this section. | | -
Install the engine front mount support bracket. - Install the retaining bolts finger tight.
| | -
Install the engine front mount. - Install the retaining bolts finger tight.
| 4. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Crankshaft pulley Woodruff key 5. To install, reverse the removal procedure. | -
CAUTION:Support the engine between the oil pan and the transmission to prevent damage to the underside of the oil pan. Using a trolley jack and suitable wooden blocks under the oil pan raise the engine. | | -
Remove the engine front mount. | | -
Remove the engine front mount support bracket. | | -
Install the timing belt. For additional information, refer to Timing Belt - in this section. | Removal Details Item 2 : Crankshaft front seal | -
Using the special tool, remove the crankshaft front seal. | Installation Details Item 2 : Crankshaft front seal | -
NOTE:New crankshaft front seals are supplied with an alignment sleeve which will be pushed out during installation. Using the special tool, install the crankshaft front seal. | |