ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Engine Cooling > < Radiator

Fiesta 2002.25 (11.2001-)

Engine Cooling - 1.6L Duratorq-TDCi (DV) Diesel - Cooling Fan Motor and Shroud Fiesta 2002.25 (11/2001-)
Removal and Installation

Removal

  1. Disconnect the battery ground cable.
    For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

  1. Disconnect the cooling fan motor and cooling fan resistor electrical connectors.

  1. Remove the cooling fan motor and shroud.
    1. Release the cooling fan motor and shroud from the retaining brackets.
    1. Push the cooling fan motor and shroud upwards and then downwards to remove.

Installation

  1. To install, reverse the removal procedure.

Engine Cooling > < Radiator