ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Fuel Injection Supply Manifold > < Throttle Body

Fiesta 2002.25 (11.2001-)

Fuel Charging and Controls - 1.25L Duratec-16V (Sigma)/1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma) - Fuel Charging Wiring Harness Fiesta 2002.25 (11/2001-)
Removal and Installation

Removal

  1. Remove the air cleaner. For additional information, refer to Section  303-12 Intake Air Distribution and Filtering.

  1. Disconnect the spark plug wires from the ignition coil.

  1. Disconnect the engine coolant temperature (ECT) sensor electrical connector.

  1. Disconnect the camshaft position (CMP) sensor electrical connector.

  1. NOTE:
    NOTE:It is necessary to lift the red locking tab before the electrical connector can be disconnected.
    Disconnect the throttle body electrical connector.

  1. Disconnect the fuel charging wiring harness electrical connector.

  1. Remove the positive crankcase ventilation (PCV) hose.

  1. Disconnect the fuel injector electrical connectors and remove the fuel charging wiring harness.

Installation

  1. To install, reverse the removal procedure.

Fuel Injection Supply Manifold > < Throttle Body