ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Accessory Drive Belt - 1.25L Duratec-16V (Sigma)-1.4L Duratec-16V (Sigma)-1.6L Duratec-16V (Sigma), Vehicles Without: Air Condit > < Accessory Drive Belt - 1.25L Duratec-16V (Sigma)-1.4L Duratec-16V (Sigma)-1.6L Duratec-16V (Sigma), Vehicles With: Air Condition

Fiesta 2002.25 (11.2001-)

Accessory Drive - Accessory Drive Belt—1.3L Duratec-8V (Rocam) Fiesta 2002.25 (11/2001-)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.

  1. Remove the radiator grille.

  1. CAUTION:
    CAUTION:Do not damage the fixing points of the headlamp during removal.
    Detach the right-hand headlamp.

  1. Disconnect the electrical connector and remove the headlamp.

  1. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt (power steering reservoir and power steering lines shown removed for clarity).

Installation

  1. To install, reverse the removal procedure.

Accessory Drive Belt - 1.25L Duratec-16V (Sigma)-1.4L Duratec-16V (Sigma)-1.6L Duratec-16V (Sigma), Vehicles Without: Air Condit > < Accessory Drive Belt - 1.25L Duratec-16V (Sigma)-1.4L Duratec-16V (Sigma)-1.6L Duratec-16V (Sigma), Vehicles With: Air Condition