Removal and Installation 34 mm open-ended spanner Dowel with a diameter of 5 mm Removal | -
Disconnect the battery ground cable. For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). | | -
Raise and support the vehicle. For additional information, refer to: Lifting (100-02 Jacking and Lifting, Description and Operation). | | -
Remove the crankshaft pulley splash shield. | | -
- Rotate the accessory drive belt tensioner clockwise and install a suitable dowel with a diameter of 5 mm into the hole of the accessory drive belt tensioner bracket.
| | -
Remove the accessory drive belt. | Installation Vehicles with air conditioning | -
To install, reverse the removal procedure. | Vehicles without air conditioning | -
To install, reverse the removal procedure. | |