| In-vehicle Repair Special Tool(s) | | Installer, Front Wheel Hub Seal 204-066 (14-028) | | | Remover, Halfshaft Seal 308-208 (16-074) | Removal WARNING:Refer to the Material Safety Data Sheets for the Automatic Transmission Fluid E-AW. Failure to follow this instruction may result in personal injury. Certain Transmission and Power Steering fluids supplied to Ford contain additives which may cause skin irritation or other skin reactions after contact.
For additional information, refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
See - Transmission Fluids. | | -
Remove the left-hand halfshaft.
For additional information, refer to: Front Halfshaft LH (205-04 Front Drive Halfshafts, Removal and Installation).
| | | -
Using the special tool, remove the halfshaft seal. - Allow the fluid to drain into a suitable container.
For additional information, refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
See - Transmission Fluids. | Installation | | -
NOTE:Install a new halfshaft seal. Using the special tool, install the halfshaft seal. | | | -
Install the left-hand halfshaft.
For additional information, refer to: Front Halfshaft LH (205-04 Front Drive Halfshafts, Removal and Installation).
| | |
/Description and Operation/Diagnosis and Testing/General Procedures/In-vehicle Repair//img/E0035859.jpg)
/Description and Operation/Diagnosis and Testing/General Procedures/In-vehicle Repair//img/E0035857.jpg)
