Removal and Installation Removal | -
Remove the bracket for the coolant pipes. | | -
Remove the heater core / evaporator housing gasket. | | -
Remove the right-hand bolts of the fresh air duct. | | -
Unclip the operating cable of the left-hand air inlet flap from the heater core / evaporator housing. | | -
Detach the left-hand air inlet flap from the fresh air duct and lay it to one side. - Remove the fresh air duct.
| | -
Remove the pollen filter housing cover. | | -
Remove the bolts of the heater core / evaporator lower housing. | | -
Remove the heater core / evaporator lower housing. | | -
Remove the upper bolts of the heater core / evaporator housing. | | -
Remove the front bolts of the heater core / evaporator housing. | | -
Remove the rear bolts of the heater core / evaporator housing. | | -
Separate the heater core / evaporator housing. | Installation | -
Reinstall the components in reverse order. | | |