Ford Workshop Service and Repair Manuals > Fiesta 2002.25 (11.2001-) > Mechanical Repairs | 5 Body and Paint | 501 Body and Paint | 501-08 Exterior Trim and Ornamentation | Removal and Installation

Exterior Trim and Ornamentation - Rocker Panel Moulding

Fiesta 2002.25 (11/2001-)

Removal and Installation

Raise and support the vehicle. For additional information, refer to: (100-02 Jacking and Lifting)
Jacking (Description and Operation),

Lifting (Description and Operation).
.

2. Remove the components in the order indicated in the following illustration(s) and table(s).

3. To install, reverse the removal procedure.

Removal Details

Remove the rocker panel moulding to floor pan retaining clips (one shown).
1. Push the rocker panel moulding to floor pan retaining clip center pin inwards.
1. Using a suitable trim clip remover, remove the rocker panel moulding to floor pan retaining clips.

Remove the rocker panel moulding.
- Pull the rocker panel moulding away from the body side, to release the rocker panel moulding to body side retaining clips.

Installation Details

Ford Workshop Service and Repair Manuals