Ford Workshop Service and Repair Manuals

Remove the rear seat backrest cover. For additional information, refer to Rear Seat Backrest Cover in this section.

2. Remove the components in the order indicated in the following illustration(s) and table(s).

3. To install, reverse the removal procedure.

Removal Details

Item 1 : Backrest latch to center safety belt retractor locking cable (if equipped)

NOTE:To aid installation, note the backrest latch cable position on the safety belt retractor.

Detach the backrest latch cable from the safety belt retractor.

Installation Details

Item 1 : Backrest latch to center safety belt retractor locking cable (if equipped)

CAUTION:Check the backrest latch cable routing, and the operation of the safety belt retractor and interlock before fully assembling the rear seat backrest.