ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Center Safety Belt Retractor > < Safety Belt System
Safety Belt System - Safety Belt Buckle and Pretensioner Fiesta 2002.25 (11/2001-)
Removal and Installation

Removal

WARNING:
WARNING:Never probe the electrical connectors of air bag modules or any other supplemental restraint system (SRS) component. Failure to follow this instruction may result in personal injury.
  1. Remove the front seat.
    For additional information, refer to: Front Seat (501-10 Seating, Removal and Installation).

  1. CAUTION:
    CAUTION:Note the position and routing of the safety belt buckle and pretensioner wiring harness to aid installation. An incorrectly routed wiring harness may lead to the wiring harness becoming damaged on the seat mechanism.
    Detach the safety belt buckle pretensioner electrical connector from the seat frame.

  1. Remove the safety belt buckle and pretensioner.

Installation

WARNING:
WARNING:Never probe the electrical connectors of air bag modules or any other SRS component. Failure to follow this instruction may result in personal injury.
  1. To install, reverse the removal procedure.

Rear Center Safety Belt Retractor > < Safety Belt System