Five Hundred 2WD V6-3.0L VIN 1 (2006)
![background image](/ford/five_hundred_2wd/v6-3.0l_vin_1/Page-1943002.png)
Loosen the brake line-to-hydraulic control unit (HCU) fittings and position the brake lines aside.
^
To install, tighten to 17 Nm (13 ft. lbs.).
4. Remove the 2 bracket-to-HCU bolts and the HCU.
^
To install, tighten to 8 Nm (71 inch lbs.).
5. To install, reverse the removal procedure.
^
Bleed the brake system.