Five Hundred 2WD V6-3.0L VIN 1 (2006)
5. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side safety canopy module electrical connector.
6. Connect the driver side safety canopy module electrical connector.
7. Install the C-pillar trim panels.
-
Verify the safety belt retractor operates without excessive effort or binding.
Freestyle with safety canopy modules
8. NOTE: Headliner removed for clarity.
Remove the restraint system diagnostic tool from the vehicle harness side of the passenger side safety canopy module electrical connector.
9. NOTE: Headliner removed for clarity.
Connect the passenger side safety canopy module electrical connector.