Five Hundred 2WD V6-3.0L VIN 1 (2006)
![background image](/ford/five_hundred_2wd/v6-3.0l_vin_1/Page-1635001.png)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION (CKP) SENSOR
Removal and Installation
1. With vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.
3. Remove the 7 pin-type retainers and the RH splash shield.
4. Disconnect the crankshaft position (CKP) sensor electrical connector.
5. Remove the bolt and the CKP sensor.
-
To install, tighten to 10 Nm (89 lb-in).
6. To install, reverse the removal procedure.