Five Hundred 2WD V6-3.0L VIN 1 (2006)
Control Module: Service and Repair
Transmission Control Module (TCM)
Removal
CAUTION: If a new transaxle or a transmission control module (TCM) is installed, the TCM will need to be reflashed to the latest level calibration
available. If the TCM is not reflashed, the wrench light on the dash may illuminate and internal transaxle damage may occur.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the battery ground cable. For additional information, refer to Battery.
3. Remove the air cleaner assembly. For additional information, refer to Fuel Delivery and Air Induction.
4. Disconnect the shift cable end.
5. Disconnect the transmission control module (TCM) electrical connector.
6. Remove the manual control lever nut.