Five Hundred 2WD V6-3.0L VIN 1 (2006)
15. NOTE: Make note of the routing and the opening that the pressure sensor and hose are being fed through on the seat cushion support assembly
for installation purposes.
Remove the OCS bladder, hose and pressure sensor from the seat cushion frame.
16. Remove the rivets and the ECU from the seat cushion frame bracket.
Installation
NOTE: If installing an OCS service kit, refer to Occupant Classification Sensor - Service Kit. See: Occupant Classification Sensor - Service Kit
All seats
1. Bend the retaining tab back on the pressure sensor bracket.