ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sensors and Switches - Steering and Suspension > < Diagram Information and Instructions|Page 2064
Page 2
background image

3. Remove the 3 lower steering column shroud screws and the lower shroud.
4. Disconnect the electrical connector.

5. Remove the ignition switch.

^

Release the 2 locking tabs.

6. To install, reverse the removal procedure.
7. Repower the SRS. For additional information, refer to Air Bag Systems.

Sensors and Switches - Steering and Suspension > < Diagram Information and Instructions|Page 2064