Five Hundred 2WD V6-3.0L VIN 1 (2006)
14. Remove and discard the strut-to-wheel knuckle nut and flagbolt.
^
To install, tighten to 175 Nm (129 ft. lbs.).
15. Separate the strut and spring assembly from the wheel knuckle.
16. To install, reverse the removal procedure.
Disassembly and Assembly
Strut and Spring Assembly
Disassembly and Assembly
WARNING: All vehicles are equipped with gas-pressurized front shock absorbers which will extend unassisted. Do not apply heat or flame