Five Hundred 2WD V6-3.0L VIN 1 (2006)
6. Decompress and remove the spring. Remove the dust boot and jounce bumper.
^
To maintain wheel camber:
-
position the notch and arrow on the upper strut mount outboard opposite the locator tab on the strut.
^
To adjust camber +0.5°:
-
position the notch and arrow on the upper strut mount inboard aligned with the locator tab on the strut.
7. CAUTION: Do not overtighten the strut rod nut. Damage to the nut or strut rod may occur.
NOTE: Make sure the spring is correctly seated in both spring seats.
To assemble, reverse the disassembly procedure.