Five Hundred 2WD V6-3.0L VIN 1 (2006)
Remove the 8 bolts from the mechatronic unit.
13. CAUTION: Do not touch the electrical connector pins. Electrostatic charge may occur and will cause damage to the mechatronic unit.
Remove the mechatronic unit from the transaxle.
14. NOTE: The 5 feed tubes may stick in the case or the mechatronic assembly, make sure that all 5 feed tubes are removed.
NOTE: Note the location and size of the 5 feed tubes for reassembly.
Remove all of the 5 feed tubes.
1
Remove the clutch (manual valve) supply feed tube.
2
Remove the primary pressure feed tube.
3
Remove the secondary pressure feed tube.
4
Remove the main (pump) pressure feed tube (smaller tube).
5
Remove and discard the torque converter clutch pressure feed tube.