Five Hundred 2WD V6-3.0L VIN 1 (2006)
![background image](/ford/five_hundred_2wd/v6-3.0l_vin_1/Page-1872002.png)
4. Using the special tool, separate the halfshaft from the hub.
5. NOTE: Do not reuse the lower ball joint nut.
Remove and discard the lower ball joint nut, then disconnect the lower control arm.
6. Remove the 2 halfshaft bearing nuts.
7. CAUTION: Do not damage the halfshaft seal.
Remove the halfshaft.
8. Inspect the halfshaft seal. If necessary, install a new halfshaft seal.
Installation
1. CAUTION: Do not damage the halfshaft seal.
Install the halfshaft.