Flex AWD V6-3.5L (2009)
Alarm System Transmitter: Service and Repair
Passive Anti-Theft System (PATS) Transceiver
Removal and Installation
1. Pulling firmly in a rearward direction, remove the steering column opening cover.
2. Remove the 3 screws and the lower steering column shroud.
3. Disconnect the Passive Anti-Theft System (PATS) transceiver electrical connector.
4. Release the tabs and remove the PATS transceiver.
5. NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Cluster (IC) again.
To install, reverse the removal procedure.
