Flex AWD V6-3.5L (2009)
11. Release the parking brake cable tension.
12. Disconnect the RH park brake cable from the front park brake cable and the frame cable bracket.
13. Remove the rear park brake cable bracket and reposition.
-
To install, tighten to 15 Nm (133 lb-in).
14. Remove the wheel opening park brake cable bracket bolts and reposition the brackets.
-
To install, tighten to 23 Nm (17 lb-ft).
15. Remove the parking brake cables from the calipers.
16. Remove the rear brake caliper bolts.
-
To install, tighten to 103 Nm (76 lb-ft).
