Flex AWD V6-3.5L (2009)
Trim Panel: Service and Repair
B-Pillar Trim Panel
B-Pillar Trim Panel
Removal and Installation
Lower trim panel
1. Remove the front door scuff plate.
-
Pull upward on the scuff plate to release the clips.
2. Remove the rear door scuff plate.
-
Pull upward on the scuff plate to release clips.
3. Remove the lower B-pillar trim panel.
-
Pull outward on the trim panel to release the clips.
Upper trim panel
4. Remove the safety belt D-ring cover.
5. Remove the safety belt D-ring bolt.
-
To install, tighten to 40 Nm (30 lb-ft).