Flex AWD V6-3.5L (2009)
4. Engage the side air bag deployment chute retaining clips and snap them together.
-
The side air bag deployment chute must encircle the side air bag module, going completely around the side air bag module and the side of the
backrest frame.
-
Align the side air bag deployment chute to the side air bag module, making sure it is centered around the side air bag module.
5. From the rear of the backrest, attach the backrest trim cover J-clip to the backrest frame wire.
6. Roll the backrest trim cover down and install the 3 second row hog rings.
7. Roll the backrest trim cover down and install the 3 first row hog rings.
8. Roll the backrest trim cover all the way down.
9. Route the wire harness and cables out through the sides of backrest trim cover.
