Flex AWD V6-3.5L (2009)
19. Seats with power seat track, connect electrical connectors and attach the pin-type retainers under the seat. For correct passenger seat wire harness
routing, refer to Seat Wire Harness Routing See: Service and Repair/Seat Wire Harness Routing.
1. Connect the side air bag module electrical connector and slide the locking clip to the lock position.
2. Connect the backrest feed electrical connector.
3. Route the wire harness and attach the connectors and wire harness retainers.
20. Close the zippers and attach the backrest trim cover retainers.
21. Install the inboard upper recliner cover in the following sequence.
1. Align the inboard upper recliner cover pocket to the recliner bracket.
2. Pivot the top of the inboard upper recliner cover forward and attach the pocket to the bracket.
3. Push in at the front and seat the clip.
22. Install the inboard recliner lower cover in the following sequence.
1. Align the inboard recliner lower cover to the inner cover and push in, seating the rear clips.
